| Brand | Dell |
|---|---|
| Category | Dell Server Hard Drives |
| Part number | RY491-REF-LOTOF5 |
| Model numbers | ST314685SS |
| Capacity | 146GB |
| Interface | SAS 3.5 Inch |
| Spindle speed (RPM) | 15000 |
| Data transfer rate | 3Gbps |
| Form factor | 3.5 Inch |
| Hot swap | Yes |
| Best for | Dell Server |
Rebuild your storage raid or make a fresh install on your PowerEdge server with Seagate Dell-branded ST314685SS 146Gb Enterprise Performance hard drive with data transfer rate of 3gb/second and 15,000rpm spindle rate with 16Mb Internal Cache and 3.5 inch SAS Interface. This hard drive is best suited for mission-critical servers, external storage arrays. (Lot of 5Pcs)
- Brand: Seagate/Dell
- Model: ST314685SS, RY491
- Capacity: 146Gb
- Interface: SAS 3.5 inch
- Data Transfer Rate: 3Gb/s
- Rotational Speed: 15,000rpm
- Internal Cache: 16Mb
- Hot-swappable: Yes
- Caddie: No
- Best for: Servers, External RAID Storage
- Shipping: Free Expedited (USA)
- Warranty: 1 Year
- Condition: Refurbished, Fully Functional, Tested 100%
- Quantity: Lot of 5Pcs
Older PowerEdge:
840, 860, 1900, 1950, 2900, 2950, 2970, 6850, 6950
PowerEdge R-Series:
R200, R300, R310, R320, R330, R410, R415, R420, R430, R510, R520, R530, R630, R710, R715, R720, R720xd, R730, R730xd, R900, R905, R920, R930
PowerEdge T-Series:
T100, T105, T110, T110 II, T300, T310, T320, T330, T410, T420, T430, T610, T620, T630, T710
Compatibility Note: RY491 is a 3.5-inch LFF SAS drive. The server must have a 3.5-inch SAS-capable drive bay/backplane. Systems configured exclusively with 2.5-inch SFF bays are not physically compatible. The appropriate Dell hot-swap caddy may be required.
840, 860, 1900, 1950, 2900, 2950, 2970, 6850, 6950
PowerEdge R-Series:
R200, R300, R310, R320, R330, R410, R415, R420, R430, R510, R520, R530, R630, R710, R715, R720, R720xd, R730, R730xd, R900, R905, R920, R930
PowerEdge T-Series:
T100, T105, T110, T110 II, T300, T310, T320, T330, T410, T420, T430, T610, T620, T630, T710
Compatibility Note: RY491 is a 3.5-inch LFF SAS drive. The server must have a 3.5-inch SAS-capable drive bay/backplane. Systems configured exclusively with 2.5-inch SFF bays are not physically compatible. The appropriate Dell hot-swap caddy may be required.