| Brand | Dell |
|---|---|
| Category | Dell Server Hard Drives |
| Part number | 0YF87J |
| Model numbers | ST10000NM0256 |
| Capacity | 10TB |
| Interface | SAS 3.5 Inch |
| Spindle speed (RPM) | 7200 |
| Data transfer rate | 12Gbps |
| Form factor | 3.5 Inch |
| Hot swap | true |
| Best for | Dell Server |
Brand: Dell
Model: ST10000NM0256 0YF87J
Capacity: 10 TB
Interface: SAS 3.5 inch
Data Transfer Rate: 12Gb/s
Rotational Speed: 7200RPM
Hot-swappable: Yes
Caddie: Yes
Best for: Servers (Not for laptops or desktops)
Shipping: Free Standard (2-4 days delivery within USA)
Warranty: 90-days
Condition: Refurbished, Tested & 100% Health
G11: R210, R210 II, R310, R410, R415, R510, R515, R710, R715, T310, T410, T610, T710
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R730xd, T330, T430, T630
G14: R240, R340, R440, R540, R740, R740xd, R740xd2, R7415, R7425, T140, T340, T440, T640
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R730xd, T330, T430, T630
G14: R240, R340, R440, R540, R740, R740xd, R740xd2, R7415, R7425, T140, T340, T440, T640
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.