| Brand | Seagate |
|---|---|
| Category | Seagate Server Hard Drives |
| Part number | ST3450857SS-LOTOF5 |
| Capacity | 450GB |
| Interface | SAS 3.5 Inch |
| Spindle speed (RPM) | 15000 |
| Data transfer rate | 6Gbps |
| Form factor | 3.5 Inch |
| Hot swap | true |
| Best for | Servers |
Rebuild Server Array with Seagate Cheetah 15k.7 hard drive that offers storage capacity of 450GB at 15,000RPM rotational speed with 3.5 Inch SAS Interface that ensures peak server performance and 24/7 data in/out reliability.
- Brand: Seagate
- Model: ST3450857SS (Lot of 5 Pcs)
- Capacity: 450Gb
- Interface: SAS 3.5 inch
- Data Transfer Rate: 6Gb/s
- Rotational Speed: 15,000rpm
- Internal Cache: 16Mb
- Hot-swappable: Yes
- Caddie: No
- Best for: Servers
- Shipping: Free Expedited (USA)
- Warranty: 90-days
- Refurbished, Tested.
G11: R210, R210 II, R310, R410, R415, R510, R515, R710, R715, T310, T410, T610, T710
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.