| Brand | Dell |
|---|---|
| Category | Dell Server Hard Drives |
| Part number | FNW88-LOTOF5 |
| Model numbers | ST1000NM0023 |
| Capacity | 1TB |
| Interface | SAS 3.5 Inch |
| Spindle speed (RPM) | 7200 |
| Data transfer rate | 6Gbps |
| Form factor | 3.5 Inch |
| Hot swap | Yes |
| Best for | Dell Server |
Equip your IT Asset with Dell Certified 1TB 7200RPM 128MB Internal Cache SAS 3.5 Inch interface hot-swap drive to ensure maximum reliability of your storage needs. Dell FNW88, ST1000NM0023 provides reliable storage coupled with faster data read/write for your IT Enterprise Network.
- Brand: Seagate, Dell
- Model: ST1000NM023, FNW88
- Capacity: 1Tb
- Interface: SAS 3.5 inch
- Data Transfer Rate: 6Gb/s
- Rotational Speed: 7,200rpm
- Internal Cache: 128Mb
- Hot-swappable: Yes
- Caddie: Yes
- Best for: PowerEdge Servers
- Shipping: Free Expedited (USA)
- Warranty: 1 Year
G11: R210, R210 II, R310, R410, R415, R510, R515, R710, R715, T310, T410, T610, T710
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.