| Brand | Dell |
|---|---|
| Category | Dell Server Hard Drives |
| Part number | NWCCG-LOTOF5 |
| Model numbers | ST6000NM0034 |
| Capacity | 6TB |
| Interface | SAS 3.5 Inch |
| Spindle speed (RPM) | 7200 |
| Data transfer rate | 6Gbps |
| Form factor | 3.5 Inch |
| Hot swap | Yes |
| Best for | Dell Server |
Increase storage capacity and read/write speed and reliability with Dell NWCCG ST6000NM0034 6TB 7200RPM 6G 3.5IN Hot-swap hard drive.
- Brand: Seagate, Dell
- Model: ST6000NM0034, NWCCG
- Capacity: 6Tb
- Interface: SAS 3.5 inch
- Data Transfer Rate: 6Gb/s
- Rotational Speed: 7,200rpm
- Internal Cache: 128Mb
- Hot-swappable: Yes
- Caddie: Yes
- Best for: PowerEdge Servers
- Shipping: Free Expedited (USA)
G11: R210, R210 II, R310, R410, R415, R510, R515, R710, R715, T310, T410, T610, T710
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.
G12: R320, R420, R520, R720, R720xd, T320, T420, T620
G13: R230, R330, R430, R530, R530xd, R730, R730xd, R830, R930, T130, T330, T430, T630
Compatibility Note
Form Factor: This is a 3.5-inch LFF SAS hard drive. The target server must have 3.5-inch drive bays and a SAS-capable backplane/controller. A server model offered only/configured with 2.5-inch SFF bays cannot physically accept this drive.
Caddy: A compatible 3.5-inch hot-swap caddy/tray is required. Caddy designs can vary by server generation and chassis configuration. If the included caddy does not match the target server, the drive itself may still be compatible but will require the correct 3.5-inch caddy for that server.